Hills Warranty
Outdoor Clothesline
1. Hills provides consumers with the following warranty in relation to this Product, in addition to complying with the requirements of any relevant legislation, including the Competition and Consumer Act 2010 (Cth) in Australia and the Consumer Guarantees Act 1993 in New Zealand (the Acts), except where a New Zealand consumer acquires the relevant Product for the purposes of a business.
2. In this warranty, we have used the following definitions:
(a)
Hills, our or
we means Hills Holdings Limited (ABN 35 007 573 417) of 159 Port Road Hindmarsh South Australia 5007;
(b)
Products means the following goods manufactured by Hills (including products manufactured for Hills by its contract manufacturers):
Hills Rotary Hoists, Fixed Head Hills Hoist, Hills Folding Frame Clotheslines and Hills Retracting Clotheslines; (c)
Material means a material or component used by Hills in the manufacture of the Products;
(d)
Warranty Period means the warranty period for a Product set out in the table below section 9, commencing from the date of purchase of the relevant Product. If the Product or part (as the case may be) is repaired or replaced, there will be no extension to the original warranty period; and
(e)
Workmanship means the handling, assembly and manufacturing processes performed by or on behalf of Hills in order to manufacture the Products.
3. Hills warrants that for the duration of the Warranty Period, all Products will be free of faults arising from defects in Workmanship or Materials, on the terms and conditions set out in this warranty.
4. Hills undertakes that if during the Warranty Period any Product, or any part of a Product, has failed to operate correctly due to faulty Workmanship or defective Material, it will repair or replace the Product or part (as the case may be) free of charge provided that the following procedure is met:
(a) The consumer must contact Hills upon becoming aware of any defect to a Product. The contact details for Hills are set out below, on this website page, under the heading “Hills Contacts”.
(b) Following consultation with Hills, Hills will determine whether there is a defect, and if so Hills agrees to (at Hills’ option):
i. in the case of goods – repair, replace or supply equivalent goods, or pay the cost of any of those remedies to the consumer; or
ii. in the case of services – supply the services again or pay the cost of having the services supplied again.
(c) If Hills requests the return of the applicable Product or part, Hills will be responsible for the collection and freight costs of returning that Product or part. The consumer agrees to assist Hills with any reasonable request to enable Hills to collect such Product or part.
(d) Hills also agrees to be responsible for the freight costs to deliver any new Product or replacement part to the consumer.
5. This warranty is in addition to any non-excludable legal rights or remedies conferred on the consumer under any applicable Act and any similar laws. To the extent permitted by law, Hills' liability for any non-excludable condition or warranty is limited to rectifying any defect at its option, as set out in paragraph 4(b) .
6. Subject to the requirements of any applicable Act or legislation and to the extent permitted by law, no liability (whether expressed or implied) of any nature whatsoever, is accepted by Hills for any consequential loss, damage or injury arising as a result of any fault in the Products.
7. This warranty does not extend to damage to Products which occurs during transit or transportation, or which is caused by any abuse, accident or improper installation, connection, use, adjustment or repair or use of goods otherwise than in accordance with instructions issued by Hills.
8. The warranty on Products is waived if any addition or attachment to the Products do not have Hills' specific approval or are not sold as Hills products. The Products are designed to perform specific tasks under established test loads and unauthorised attachments may produce stresses for which the design is not appropriate.
9. The following applies to consumers who purchased a relevant Product in Australia:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
| Product |
Warranty Period
|
Premium Range Rotary Hoists
|
10 years
|
Premium Range Folding Frame Clotheslines
|
10 years
|
Premium Range Folding Frame Posts Kits
|
10 years
|
Premium Range Retracting Clotheslines (excluding polycore line)
|
10 years
|
Free-Standing Range Portable Clotheslines (excluding polycore line)
|
3 years
|
Everyday Range Rotary Hoists (excluding polycore line)
|
10 years
|
Everyday Range Folding Frame Clotheslines (excluding polycore line)
|
10 years
|
Everyday Range Retracting Clotheslines (excluding polycore line)
|
10 years
|
Heritage Range Fixed Head Hoists
|
10 years
|
Polycore line
|
1 year
|
Hills Smart Pegs
|
2 years |
Laundry Products
1. Hills provides consumers with the following warranty in relation to this Product, in addition to complying with the requirements of any relevant legislation, including the Competition and Consumer Act 2010 (Cth) in Australia and the Consumer Guarantees Act 1993 in New Zealand (the Acts), except where a New Zealand consumer acquires the relevant Product for the purposes of a business.
2. In this warranty, we have used the following definitions:
(a)
Hills, our or
we means Hills Holdings Limited (ABN 35 007 573 417) of 159 Port Road Hindmarsh South Australia 5007;
(b)
Products means the following goods manufactured by Hills (including products manufactured for Hills by its contract manufacturers):
Ironing Boards, Hills Clothes Airers, Hills Laundry Trolleys, Hills Clothes Stands and Hills Portable Clotheslines;
(c)
Material means a material or component used by Hills in the manufacture of the Products;
(d)
Warranty Period means 3 years from the date of purchase of the relevant Product, except in the case where a special condition exists for a cover, overlay and/or jug, the warranty period for these parts is set out in the table below section 9, commencing from the date of purchase of the relevant Product. If the Product or part (as the case may be) is repaired or replaced, there will be no extension to the original warranty period; and
(e)
Workmanship means the handling, assembly and manufacturing processes performed by or on behalf of Hills in order to manufacture the Products.
3. Hills warrants that for the duration of the Warranty Period, all Products will be free of faults arising from defects in Workmanship or Materials, on the terms and conditions set out in this warranty.
4. Hills undertakes that if during the Warranty Period any Product, or any part of a Product, has failed to operate correctly due to faulty Workmanship or defective Material, it will repair or replace the Product or part (as the case may be) free of charge provided that the following procedure is met:
(a) The consumer must contact Hills upon becoming aware of any defect to a Product. The contact details for Hills are set out below, on this website page, under the heading “Hills Contacts”.
(b) Following consultation with Hills, Hills will determine whether there is a defect, and if so Hills agrees to (at Hills’ option):
i. in the case of goods – repair, replace or supply equivalent goods, or pay the cost of any of those remedies to the consumer; or
ii. in the case of services – supply the services again or pay the cost of having the services supplied again.
(c) If Hills requests the return of the applicable Product or part, Hills will be responsible for the collection and freight costs of returning that Product or part. The consumer agrees to assist Hills with any reasonable request to enable Hills to collect such Product or part.
(d) Hills also agrees to be responsible for the freight costs to deliver any new Product or replacement part to the consumer.
5. This warranty is in addition to any non-excludable legal rights or remedies conferred on the consumer under any applicable Act and any similar laws. To the extent permitted by law, Hills' liability for any non-excludable condition or warranty is limited to rectifying any defect at its option, as set out in paragraph 4(b) .
6. Subject to the requirements of any applicable Act or legislation and to the extent permitted by law, no liability (whether expressed or implied) of any nature whatsoever, is accepted by Hills for any consequential loss, damage or injury arising as a result of any fault in the Products.
7. This warranty does not extend to damage to Products which occurs during transit or transportation, or which is caused by any abuse, accident or improper installation, connection, use, adjustment or repair or use of goods otherwise than in accordance with instructions issued by Hills.
8. The warranty on Products is waived if any addition or attachment to the Products do not have Hills' specific approval or are not sold as Hills products. The Products are designed to perform specific tasks under established test loads and unauthorised attachments may produce stresses for which the design is not appropriate.
9. The following applies to consumers who purchased a relevant Product in Australia:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
| Product |
Warranty Period
|
Orbit jug
|
1 year
|
Elegance cover
|
1 year
|
Agility cover and overlay
|
1 year
|
| Caprice cover and overlay |
1 year
|
Divita cover and overlay
|
1 year
|
Sienna cover and overlay
|
1 year
|
Tabletop cover and overlay
|
1 year
|
Verini cover and overlay
|
1 year
|
Doors
1. Hills provides consumers with the following warranty in relation to this Product, in addition to complying with the requirements of any relevant legislation, including the Competition and Consumer Act 2010 (Cth) in Australia and the Consumer Guarantees Act 1993 in New Zealand (the Acts), except where a New Zealand consumer acquires the relevant Product for the purposes of a business.
2. In this warranty, we have used the following definitions:
(a)
Hills, our or
we means Hills Holdings Limited (ABN 35 007 573 417) of 159 Port Road Hindmarsh South Australia 5007;
(b)
Products means the following goods manufactured by Hills (including products manufactured for Hills by its contract manufacturers):
Hills Barrier Doors, Hills Architectural Doors, Hills Invisimesh Door, Screen Doors and Hills Manhattan Timber Door; (c)
Material means a material or component used by Hills in the manufacture of the Products;
(d)
Warranty Period means the warranty period for a Product set out in the Section 9 table, commencing from the date of purchase of the relevant Product. If the Product or part (as the case may be) is repaired or replaced, there will be no extension to the original warranty period; and
(e)
Workmanship means the handling, assembly and manufacturing processes performed by or on behalf of Hills in order to manufacture the Products.
3. Hills warrants that for the duration of the Warranty Period, all Products will be free of faults arising from defects in Workmanship or Materials, on the terms and conditions set out in this warranty.
4. Hills undertakes that if during the Warranty Period any Product, or any part of a Product, has failed to operate correctly due to faulty Workmanship or defective Material, it will repair or replace the Product or part (as the case may be) free of charge provided that the following procedure is met:
(a) The consumer must contact Hills upon becoming aware of any defect to a Product. The contact details for Hills are set out below, on this website page, under the heading “Hills Contacts”.
(b) Following consultation with Hills, Hills will determine whether there is a defect, and if so Hills agrees to (at Hills’ option):
i. in the case of goods – repair, replace or supply equivalent goods, or pay the cost of any of those remedies to the consumer; or
ii. in the case of services – supply the services again or pay the cost of having the services supplied again.
(c) If Hills requests the return of the applicable Product or part, Hills will be responsible for the collection and freight costs of returning that Product or part. The consumer agrees to assist Hills with any reasonable request to enable Hills to collect such Product or part.
(d) Hills also agrees to be responsible for the freight costs to deliver any new Product or replacement part to the consumer.
5. This warranty is in addition to any non-excludable legal rights or remedies conferred on the consumer under any applicable Act and any similar laws. To the extent permitted by law, Hills' liability for any non-excludable condition or warranty is limited to rectifying any defect at its option, as set out in paragraph 4(b) .
6. Subject to the requirements of any applicable Act or legislation and to the extent permitted by law, no liability (whether expressed or implied) of any nature whatsoever, is accepted by Hills for any consequential loss, damage or injury arising as a result of any fault in the Products.
7. This warranty does not extend to damage to Products which occurs during transit or transportation, or which is caused by any abuse, accident or improper installation, connection, use, adjustment or repair or use of goods otherwise than in accordance with instructions issued by Hills.
8. The warranty on Products is waived if any addition or attachment to the Products do not have Hills' specific approval or are not sold as Hills products. The Products are designed to perform specific tasks under established test loads and unauthorised attachments may produce stresses for which the design is not appropriate.
9. The following applies to consumers who purchased a relevant Product in Australia:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
| Product |
Warranty Period
|
Aluminium Screen Doors
|
1 year
|
Aluminium Barrier Doors (excluding lock assembly and mesh)
|
2 years
|
Aluminium Architectural Doors (excluding lock assembly and mesh)
|
2 years
|
Aluminium Invisimesh Doors (excluding lock assembly and mesh)
|
2 years
|
Steel Screen Doors
|
1 year
|
Timber Single Pane Doors
|
1 year
|
Timber Double Pane Doors
|
1 year
|
Timber Heritage Style Doors
|
1 year
|
Timber Manhattan Style Doors (excluding mesh)
|
2 years
|
Lock assembly
|
1 year
|
Mesh
|
1 year
|
Sprayers
1. Hills provides consumers with the following warranty in relation to this Product, in addition to complying with the requirements of any relevant legislation, including the Competition and Consumer Act 2010 (Cth) in Australia and the Consumer Guarantees Act 1993 in New Zealand (the Acts), except where a New Zealand consumer acquires the relevant Product for the purposes of a business.
2. In this warranty, we have used the following definitions:
(a) Hills, our or we means Hills Holdings Limited (ABN 35 007 573 417) of 159 Port Road Hindmarsh South Australia 5007;
(b) Products means the following goods manufactured by Hills (including products manufactured for Hills by its contract manufacturers): Hills Sprayers;
(c) Material means a material or component used by Hills in the manufacture of the Products;
(d) Warranty Period means 3 years from the date of purchase of the relevant Product and, in relation to Industrial Sprayers, means a period of 2 years for the sprayer and 1 year for the seals, lance assembly and hose assembly from the date of purchase of the Product. If the Product or part (as the case may be) is repaired or replaced, there will be no extension to the original warranty period; and
(e) Workmanship means the handling, assembly and manufacturing processes performed by or on behalf of Hills in order to manufacture the Products.
3. Hills warrants that for the duration of the Warranty Period, all Products will be free of faults arising from defects in Workmanship or Materials, on the terms and conditions set out in this warranty.
4. Hills undertakes that if during the Warranty Period any Product, or any part of a Product, has failed to operate correctly due to faulty Workmanship or defective Material, it will repair or replace the Product or part (as the case may be) free of charge provided that the following procedure is met:
(a) The consumer must contact Hills upon becoming aware of any defect to a Product. The contact details for Hills are set out below, on this website page, under the heading “Hills Contacts”.
(b) Following consultation with Hills, Hills will determine whether there is a defect, and if so Hills agrees to (at Hills’ option):
i. in the case of goods – repair, replace or supply equivalent goods, or pay the cost of any of those remedies to the consumer; or
ii. in the case of services – supply the services again or pay the cost of having the services supplied again.
(c) If Hills requests the return of the applicable Product or part, Hills will be responsible for the collection and freight costs of returning that Product or part. The consumer agrees to assist Hills with any reasonable request to enable Hills to collect such Product or part.
(d) Hills also agrees to be responsible for the freight costs to deliver any new Product or replacement part to the consumer.
5. This warranty is in addition to any non-excludable legal rights or remedies conferred on the consumer under any applicable Act and any similar laws. To the extent permitted by law, Hills' liability for any non-excludable condition or warranty is limited to rectifying any defect at its option, as set out in paragraph 4(b) .
6. Subject to the requirements of any applicable Act or legislation and to the extent permitted by law, no liability (whether expressed or implied) of any nature whatsoever, is accepted by Hills for any consequential loss, damage or injury arising as a result of any fault in the Products.
7. This warranty does not extend to damage to Products which occurs during transit or transportation, or which is caused by any abuse, accident or improper installation, connection, use, adjustment or repair or use of goods otherwise than in accordance with instructions issued by Hills.
8. The warranty on Products is waived if any addition or attachment to the Products do not have Hills' specific approval or are not sold as Hills products. The Products are designed to perform specific tasks under established test loads and unauthorised attachments may produce stresses for which the design is not appropriate.
9. The following applies to consumers who purchased a relevant Product in Australia:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Play Gyms and Slides1. Hills provides consumers with the following warranty in relation to this Product, in addition to complying with the requirements of any relevant legislation, including the Competition and Consumer Act 2010 (Cth) in Australia and the Consumer Guarantees Act 1993 in New Zealand (the Acts), except where a New Zealand consumer acquires the relevant Product for the purposes of a business.
2. In this warranty, we have used the following definitions:
(a)
Hills, our or
we means Hills Holdings Limited (ABN 35 007 573 417) of 159 Port Road Hindmarsh South Australia 5007;
(b)
Products means the following goods manufactured by Hills (including products manufactured for Hills by its contract manufacturers):
Chimpanzee, Gibbon, Gorilla Lemur, Marmoset, Orangutan, Adda Slide and Free Standing Slide; (c)
Material means a material or component used by Hills in the manufacture of the Products;
(d)
Warranty Period means twelve (12) months from the date of purchase of the relevant Product. If the Product or part (as the case may be) is repaired or replaced, there will be no extension to the original warranty period; and
(e)
Workmanship means the handling, assembly and manufacturing processes performed by or on behalf of Hills in order to manufacture the Products.
3. Hills warrants that for the duration of the Warranty Period, all Products will be free of faults arising from defects in Workmanship or Materials, on the terms and conditions set out in this warranty.
4. Hills undertakes that if during the Warranty Period any Product, or any part of a Product, has failed to operate correctly due to faulty Workmanship or defective Material, it will repair or replace the Product or part (as the case may be) free of charge provided that the following procedure is met:
(a) The consumer must contact Hills upon becoming aware of any defect to a Product. The contact details for Hills are set out below, on this website page, under the heading “Hills Contacts”.
(b) Following consultation with Hills, Hills will determine whether there is a defect, and if so Hills agrees to (at Hills’ option):
i. in the case of goods – repair, replace or supply equivalent goods, or pay the cost of any of those remedies to the consumer; or
ii. in the case of services – supply the services again or pay the cost of having the services supplied again.
(c) If Hills requests the return of the applicable Product or part, Hills will be responsible for the collection and freight costs of returning that Product or part. The consumer agrees to assist Hills with any reasonable request to enable Hills to collect such Product or part.
(d) Hills also agrees to be responsible for the freight costs to deliver any new Product or replacement part to the consumer.
5. This warranty is in addition to any non-excludable legal rights or remedies conferred on the consumer under any applicable Act and any similar laws. To the extent permitted by law, Hills' liability for any non-excludable condition or warranty is limited to rectifying any defect at its option, as set out in paragraph 4(b) .
6. Subject to the requirements of any applicable Act or legislation and to the extent permitted by law, no liability (whether expressed or implied) of any nature whatsoever, is accepted by Hills for any consequential loss, damage or injury arising as a result of any fault in the Products.
7. This warranty does not extend to damage to Products which occurs during transit or transportation, or which is caused by any abuse, accident or improper installation, connection, use, adjustment or repair or use of goods otherwise than in accordance with instructions issued by Hills.
8. The warranty on Products is waived if any addition or attachment to the Products do not have Hills' specific approval or are not sold as Hills products. The Products are designed to perform specific tasks under established test loads and unauthorised attachments may produce stresses for which the design is not appropriate.
9. The following applies to consumers who purchased a relevant Product in Australia:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Hills Contacts
For enquiries about Hills Products or Hills Warranty, please contact your nearest Hills Customer Service Centre during their local standard business hours:
Australia
1300 300 564
info@hills.com.au
New Zealand
09 262 3052
sales@hills.co.nz